Tampa Hackerspace - User contributions [en]

Tools: Printers

2025-07-01T17:52:00Z

Moss:

== HP Designjet T1100ps ==
Plug in via ethernet for web based upload of printable files.

=== Ink ===
* Cyan (C9371A) replaced: ???
* Magenta (C9372A) replaced: ???
* Yellow (C9373A) replaced: ???
* Photo Black (C9370A) replaced: ???
* Matte Black (C9403A) replaced: ???
* Gray (C9374A) replaced: ???

=== Printheads ===
* Gray/Photo Black (C9380A) replaced: 2025-03-26
* Matte Black/Yellow (C9384A): 2025-02-18
* Magenta/Cyan (C9383A) replaced: ???

== Konica Minolta Magicolor 7450ii ==

=== Toner ===
* Cyan replaced: 2025-02-12
* Magenta replaced: ???
* Yellow replaced: ???
* Black replaced: ???

=== Printheads ===

== Epson WF-7710 ==
Out of service, needs printheads.

== HP Color LaserJet CP2025dn ==

Added to network 2025-07-01

IP Address: '''10.255.0.196'''

=== Notes ===

==== macOS ====

Must use '''IP''' -> '''Protocol: HP Jetdirect - Socket''' when using the '''Add Printer''' dialogue

Tools: Printers

2025-07-01T17:49:10Z

Moss: /* HP Color LaserJet CP2025dn */

Tools: Printers

2025-07-01T17:48:44Z

Moss:

Tools: Expert II LX Vinyl Cutter

2025-06-11T20:05:30Z

Moss:

Max. Cutting Width: 600 mm (23.6 in.)

Max. Loading Width: 719 mm (28.3 in.)

== Setup & Install ==
# Login to the "Vinyl PC"
# Ensure the USB cable is plugged into the PC
# Ensure there is no material loaded in the ExpertIILX
# Turn on the ExpertIILX
# Use the "Vinyl PC" to open the Desktop shortcut named "ExpertIILX"
# Wait for the virtual machine to boot and auto-login
# Right click the USB icon on the bottom right of the virtual machine window
# Left click "Unknown device"
# Double click the "InkCut" icon on the Desktop of the virtual machine
# Use InkCut's "File -> Open" menu option to import vectors
# Load your material into the ExpertIILX
# Use InkCut's "Device -> Send to device" menu option
# Close InkCut
# Shutdown the virtual machine

== Tips ==
* Any files you place in the Downloads folder will appear within the InkCut virtual machine
* Make sure to align your material, you may need to cut a straight edge to help. Crooked material will cause it to skew as it feeds.

== See Also ==
* [http://uscribe.com.au/wp-content/uploads/GCCExpertII_UserManual.pdf User Manual]
* [[Tools: Silhouette Portrait]]

[[Category:Crafting & Art]]
[[Category:Tools]]
[[Category:Tools:Vinyl_Cutting]]

Tools: Expert II LX Vinyl Cutter

2025-06-11T20:03:10Z

Moss:

Max. Cutting Width: 600 mm (23.6 in.)

Max. Loading Width: 719 mm (28.3 in.)

== Setup & Install ==
# Login to the "Vinyl PC"
# Ensure the USB cable is plugged into the PC
# Ensure there is no material loaded in the ExpertIILX
# Turn on the ExpertIILX
# Use the "Vinyl PC" to open the Desktop shortcut named "ExpertIILX"
# Wait for the Virtual Machine to boot and auto-login
# Right click the USB icon on the bottom right of the Virtual Machine window
# Left click "Unknown device"
# Double click the "InkCut" icon on the Desktop of the Virtual Machine
# Use InkCut's "File -> Open" menu option to import vectors
# Load your material into the ExpertIILX
# Use InkCut's "Device -> Send to device" menu option

== Tips ==
* Any files you place in the Downloads folder will appear within the InkCut Virtual Machine
* Make sure to align your material, you may need to cut a straight edge to help. Crooked material will cause it to skew as it feeds.

== See Also ==
* [http://uscribe.com.au/wp-content/uploads/GCCExpertII_UserManual.pdf User Manual]
* [[Tools: Silhouette Portrait]]

[[Category:Crafting & Art]]
[[Category:Tools]]
[[Category:Tools:Vinyl_Cutting]]

Tools: Expert II LX Vinyl Cutter

2025-06-11T19:57:44Z

Moss:

Max. Cutting Width: 600 mm (23.6 in.)

Max. Loading Width: 719 mm (28.3 in.)

== Setup & Install ==
# Login to the "Vinyl PC"
# Ensure the USB cable is plugged into the PC
# Ensure there is no material loaded in the ExpertIILX
# Turn on the ExpertIILX
# Use the "Vinyl PC" to open the Desktop shortcut named "ExpertIILX"
# Wait for the Virtual Machine to boot and auto-login
# Right click the USB icon on the bottom right of the Virtual Machine window
# Left click "Unknown device"
# Double click the "InkCut" icon on the Desktop of the Virtual Machine
# Use InkCut's "File -> Open" menu option to import vectors
# Load your material into the ExpertIILX
# Use InkCut's "Device -> Send to device" menu option

== See Also ==
* [http://uscribe.com.au/wp-content/uploads/GCCExpertII_UserManual.pdf User Manual]
* [[Tools: Silhouette Portrait]]

[[Category:Crafting & Art]]
[[Category:Tools]]
[[Category:Tools:Vinyl_Cutting]]

Tools: Expert II LX Vinyl Cutter

2025-06-11T19:56:30Z

Moss: Linux VM

Max. Cutting Width: 600 mm (23.6 in.)

Max. Loading Width: 719 mm (28.3 in.)

== Setup & Install ==
# Login to the 'Vinyl PC'
# Ensure the USB cable is plugged into the PC
# Ensure there is no material loaded in the ExpertIILX
# Turn on the ExpertIILX
# Use the 'Vinyl PC' to open the Desktop shortcut named 'ExpertIILX'
# Wait for the Virtual Machine to boot and auto-login
# Right click the USB icon on the bottom right of the Virtual Machine window
# Left click 'Unknown device'
# Double click the 'InkCut' icon on the Desktop of the Virtual Machine
# Use InkCut's "File -> Open" menu option to import vectors
# Load your material into the ExpertIILX
# Use InkCut's "Device -> Send to device" menu option

== See Also ==
* [http://uscribe.com.au/wp-content/uploads/GCCExpertII_UserManual.pdf User Manual]
* [[Tools: Silhouette Portrait]]

[[Category:Crafting & Art]]
[[Category:Tools]]
[[Category:Tools:Vinyl_Cutting]]

Tools: Printers

2025-03-26T14:22:34Z

Moss:

Tools: Printers

2025-03-26T14:18:19Z

Moss:

== HP Designjet T1100ps ==
Plug in via ethernet for web based upload of printable files.

=== Ink ===
=== Printheads ===
* Gray/Black replaced: 2025-03-26
* Yellow/Black: 2025-02-18
* Cyan/Magenta replaced: ???

== Konica Minolta Magicolor 7450ii ==

=== Toner ===
* Cyan replaced: 2025-02-12
* Magenta replaced: ???
* Yellow replaced: ???
* Black replaced: ???

=== Printheads ===

== Epson WF-7710 ==
Out of service, needs printheads.

Tools: Printers

2025-03-26T14:18:05Z

Moss: Created page with "== HP Designjet T1100ps == Plug in via ethernet for web based upload of printable files. === Ink === === Printheads === * Gray/Black replaced: 2025-03-26 * Yellow/Black: 2025-02-18 * Cyan/Magenta replaced: ??? == Konica Minolta Magicolor 7450ii == === Toner === * Cyan replaced: 2025-02-12 * Magenta replaced: ??? * Yellow replaced: ??? * Black replaced: ??? === Printheads === === Epson WF-7710 === Out of service, needs printheads."

== HP Designjet T1100ps ==
Plug in via ethernet for web based upload of printable files.

=== Ink ===
=== Printheads ===
* Gray/Black replaced: 2025-03-26
* Yellow/Black: 2025-02-18
* Cyan/Magenta replaced: ???

== Konica Minolta Magicolor 7450ii ==

=== Toner ===
* Cyan replaced: 2025-02-12
* Magenta replaced: ???
* Yellow replaced: ???
* Black replaced: ???

=== Printheads ===

=== Epson WF-7710 ===
Out of service, needs printheads.

HowTo: Transfer Files

2025-03-26T10:25:57Z

Moss:

=== PairDrop ===
[https://github.com/schlagmichdoch/pairdrop Open Source] web app that works on Linux, Mac, Windows, Android, and iOS devices that are connected to the internet (WiFi/cellular/Ethernet).

# Open a web browser and navigate to [https://pairdrop.net/# PairDrop] on '''both devices''' (sender and receiver).
# Use the '''receiving''' device to press the [[File:Pairdrop users-between-lines.png|32x32px]] symbol on the top right of the PairDrop page.
# Use the '''sending''' device to scan the QR code that is displayed or navigate to the link.
# Look at the bottom of the PairDrop page on the '''receiving''' device and note the name and icon that appears below "You".
# Use the '''sending''' device to press the '''icon''' that matches the name and icon from the previous step.
# Use the '''sending''' device to select the files you would like to send.
# Use the '''sending''' device to press the "'''Send'''" button.
# Use the '''receiving''' device to press the "'''Save'''" button.
# The files will now be saved to the Downloads folder on the '''receiving''' device.

=== Warnings ===
'''Do not use''' [https://snapdrop.net/ SnapDrop] or [https://www.sharedrop.io/ ShareDrop] as they have been purchased by a corporation to distribute adware and they are no longer Open Source.

[[Category:HowTo]]
[[Category:IT]]
[[Category:Main]]

File:Pairdrop users-between-lines.png

2025-03-26T10:20:09Z

Moss:

HowTo: Transfer Files

2025-03-26T10:09:34Z

Moss:

=== PairDrop ===
[https://github.com/schlagmichdoch/pairdrop Open Source] web app that works on Linux, Mac, Windows, Android, and iOS devices that are connected to the internet (WiFi/cellular/Ethernet).

# Open a web browser and navigate to [https://pairdrop.net/# PairDrop] on '''both devices''' (sender and receiver).
# Use the '''receiving''' device to press the '''+''' symbol on the top right of the ShareDrop page.
# Use the '''sending''' device to scan the QR code that is displayed or navigate to the link.
# Look at the bottom of the SnapDrop page on the '''receiving''' device and note the name and icon that appears below "You".
# Use the '''sending''' device to press the '''icon''' that matches the name and icon from the previous step.
# Use the '''sending''' device to select the files you would like to send.
# Use the '''sending''' device to press the "'''Send'''" button.
# Use the '''receiving''' device to press the "'''Save'''" button.
# The files will now be saved to the Downloads folder on the '''receiving''' device.

[[Category:HowTo]]
[[Category:IT]]
[[Category:Main]]

HowTo: Transfer Files

2025-03-26T10:09:13Z

Moss:

=== PairDrop ===
[https://github.com/schlagmichdoch/pairdrop] web app that works on Linux, Mac, Windows, Android, and iOS devices that are connected to the internet (WiFi/cellular/Ethernet).

# Open a web browser and navigate to [https://pairdrop.net/# PairDrop] on '''both devices''' (sender and receiver).
# Use the '''receiving''' device to press the '''+''' symbol on the top right of the ShareDrop page.
# Use the '''sending''' device to scan the QR code that is displayed or navigate to the link.
# Look at the bottom of the SnapDrop page on the '''receiving''' device and note the name and icon that appears below "You".
# Use the '''sending''' device to press the '''icon''' that matches the name and icon from the previous step.
# Use the '''sending''' device to select the files you would like to send.
# Use the '''sending''' device to press the "'''Send'''" button.
# Use the '''receiving''' device to press the "'''Save'''" button.
# The files will now be saved to the Downloads folder on the '''receiving''' device.

[[Category:HowTo]]
[[Category:IT]]
[[Category:Main]]

Tools: Vacuum Former

2024-12-13T08:38:01Z

Moss:

==== Documentation ====

[https://drive.google.com/file/d/12tR13s7r3J21EV9cdm7xrswrEvTH1xwa/view?usp=drivesdk Sign Off Sildes]
[[Category:Tools]]

HowTo: Transfer Files

2024-12-13T04:06:05Z

Moss:

=== ShareDrop ===
[https://github.com/ShareDropio/sharedrop Open source] web app that works on Linux, Mac, Windows, Android, and iOS devices that are connected to the internet (WiFi/cellular/Ethernet).

# Open a web browser and navigate to [https://sharedrop.io ShareDrop] on '''both devices''' (sender and receiver).
# Use the '''receiving''' device to press the '''+''' symbol on the top right of the ShareDrop page.
# Use the '''sending''' device to scan the QR code that is displayed or navigate to the link.
# Look at the bottom of the SnapDrop page on the '''receiving''' device and note the name and icon that appears below "You".
# Use the '''sending''' device to press the '''icon''' that matches the name and icon from the previous step.
# Use the '''sending''' device to select the files you would like to send.
# Use the '''sending''' device to press the "'''Send'''" button.
# Use the '''receiving''' device to press the "'''Save'''" button.
# The files will now be saved to the Downloads folder on the '''receiving''' device.

[[Category:HowTo]]
[[Category:Main]]

HowTo: Transfer Files

2024-12-13T04:05:23Z

Moss: Created page with "=== ShareDrop === [https://github.com/ShareDropio/sharedrop Open source] web app that works on Linux, Mac, Windows, Android, and iOS devices that are connected to the internet (WiFi/cellular/Ethernet). # Open a web browser and navigate to [https://sharedrop.io ShareDrop] on '''both devices''' (sender and receiver). # Use the '''receiving''' device to press the '''+''' symbol on the top right of the ShareDrop page. # Use the '''sending''' device to scan the QR code that..."

Tools: Vacuum Former

2024-12-13T03:49:18Z

Moss:

==== Documentation ====

[[Category:Tools]]

Tools: Vacuum Former

2024-12-13T03:46:33Z

Moss: Created page with "==== Documentation ===="

==== Documentation ====

Tools: Heat Press

2024-10-28T02:53:49Z

Moss:

DL8300 Heat Press

This is a somewhat generic cheap heat press.

Some potential directions [https://www.t-shirtforums.com/threads/heat-press-xmtd-708-instructions-and-settings.156041/ here] and a not-quite-matching [https://uscutter.com/content/PDFs/16x20_Auto_Open_Clamshell_Manual.pdf manual].

== Lamination ==

Paper can be laminated using the following process
# Preheat to 300F/150C
# Place the thermal laminating sleeve between two Teflon sheets (in the left drawer)
# Place the the two Teflon sheets on top of the carpet underlayment
# Close the press for 35 seconds (tested with 4x6" sleeves, will vary based on size and thickness)
# Open the press and remove the Teflon sheets
# Let it rest for 5-10 seconds before carefully peeling away the top Teflon sheet from the corner

[[Category:Crafting & Art]]
[[Category:Tools]]

Tools: Baby Lock BND9 Embroidery Machine

2024-07-23T23:38:07Z

Moss:

[[File: BabyLockBND9.jpg|250px|thumb|right|Baby Lock BND9]]

The Baby Lock BND9 is a six-needle embroidery machine.

== Manuals ==

(These are manuals for the newer version but very similar to our machine.)

* [https://drive.google.com/file/d/1X_YjsPbSCfDlRK_A9ktMBWPRaQxitK9L/ BND9-2 Quick Reference Guide]
* [https://drive.google.com/file/d/16W3evjs93izS6OXwz6SpCGG4Z5HNTzVI/ BND9-2 Manual]

[[Category:Sewing & Textiles]]
[[Category:Tools]]

== Templates ==

[[:File:Babylock_Endurance_60_x_40mm.svg|60x40mm]]

[[:File:Babylock_Endurance_100_x_100mm.svg|100x100mm]]

[[:File:Babylock_Endurance_180_x_130mm.svg|180x130mm]]

[[:File:Babylock_Endurance_300_x_200mm.svg|300x200mm]]

== InkScape/InkStitch Software Resources ==
* [https://youtu.be/9SoGm4lUr7w How to install Inkscape Inkstitch in Windows 10 ]
* [https://inkscape.org/release/inkscape-1.2/ InkScape V1.2 Software ] Install First
* [https://inkstitch.org/ InkStitch V2.1.2 Software] InkStitch is an Extension to InkScape

== InkScape Resources ==
* [https://inkscape.org/learn/ InkScape WebSite ] - Massive Amount of Learning Resources !
* [https://www.youtube.com/watch?v=pa6a7oz7vEE Logos By Nick - Inkscape Explained in 5 Minutes ]
* [https://youtu.be/-_KJZPOYBeA InkScape Tutorial for Beginners in 11 Minutes ]
* [https://youtu.be/girjT1RlShM Iron Echo Design - Inkscape QuickStart ]
* [https://youtu.be/_0q10vMpH-4 Bloomingdale Public Library - Inkscape for Beginners ]
* [https://www.youtube.com/playlist?list=PLxtauMB7RON-stAIiuQ_mRVNJw74gcaJj InkScape Full Tutorial ]
* [https://www.youtube.com/c/LogosByNick Logos By Nick] Many step-by-step examples that will educate and inspire
* [https://www.youtube.com/c/IronEchoDesign Iron Echo Design] Many step-by-step examples that will educate and inspire
* [https://youtu.be/Hwilw97pR6k Common Mistakes New Users Make ]

* [https://youtu.be/Hwilw97pR6k 10 Hidden Secrets In Inkscape That Will Improve Your Workflow ]

== InkStitch Resources ==
* [https://www.youtube.com/c/InkStitch InkStitch YouTube Channel] - Learning Resources and Previews of Future Features
* [https://www.youtube.com/c/LowTechLinux Low Tech Linux] - Many descriptive videos using InkStitch
* [https://youtu.be/mPaGwjwpzWc Project Anonymous ] - Many descriptive videos using InkStitch
* [https://youtu.be/v3uE1dHAwBc Low Tech Linux - Inkstitch Beginners Guide Part 1]
* [https://youtu.be/myUhkDpWmjc Too many layers? too thick? Two ways to fix ]
* [https://youtu.be/hwifBaBbppE Stitch Patterns, Pattern Fill stitches ]
* [https://youtu.be/0YeINKFq-L8 Explains InkStitch Params and Reasons to Change Them ]
* [https://youtu.be/Ld5002S7SBc A closer look at Satin Stitch in InkStitch ]
* [https://www.youtube.com/watch?v=yDm6F5sT53I InkStitch - Knockdown stitches are easy ]
* [https://www.youtube.com/watch?v=8czvSwCZVvw Part 2 - Lettering Knockdown ]

== Embroidery Resources ==
* [https://babylock.com/ BabyLock Embroidery Machine Website ]
* [https://www.youtube.com/c/babylocksewing BabyLock Sewing YouTube Channel ]
* [https://en.wikipedia.org/wiki/Machine_embroidery Wikipedia Machine Embroidery Website ]
* [https://www.machineembroiderygeek.com Embroidery Geek Website ]
* [https://machineembroiderygeek.com/ Machine Embroidery Files for Sale + Tips & How To ]
* [https://youtu.be/5cJL28anq08 How To Download Designs & Transfer To Your Baby Lock ]
* [https://youtu.be/OZRe5w7bHZk Multi-Needle Hook & Needle Bar Oiling ]
* [https://www.youtube.com/watch?v=YQa6RZQD5RI How to Remove Anchors, Change Thread Colors and Swap Thread Positions on a Multi-needle Machine ]
* [https://youtu.be/msRLlIXs8jE Multi-Needle Maintenance ]
* [https://edutechwiki.unige.ch/en/Embroidery_format_DST edutechwiki DST Embroidery File Format ]
* [https://edutechwiki.unige.ch/en/Embroidery_format_PEC edutechwiki PEC Embroidery File Format ]
* [https://edutechwiki.unige.ch/en/Embroidery_format_PES edutechwiki PES Embroidery File Format ]
* [https://youtu.be/n2H_u9j8nT0 A Beginners Guide to Machine Embroidery Stitches ]
* [https://www.machineembroiderygeek.com/what-is-a-knockdown-stitch/ Embroidery Geek - What is a Knockdown Stitch ]

== Graphic Resources (Photo and Vector) ==
* [https://www.crayola.com/featured/free-coloring-pages/ FREE Crayola Coloring Pages ] - Fairy-mermaid-coloring-page.png found here
* [https://www.bitmoji.com/ Bitmoji is your own personal emoji. ] - Awesome.png created here
* [https://www.creativefabrica.com/freebies/free-crafts/ www.creativefabrica.com/freebies/free-crafts ]
* [https://designbundles.net/free-design-resources/free-svgs designbundles.net/free-design-resources/free-svgs ] - DB-Mermaid-Birthday-New.zip found here
* [https://lovesvg.com/product-category/free-svg-files/ lovesvg.com/product-category/free-svg-files ]
* [https://hellosvg.com/ hellosvg.com ]
* [https://www.picabay.com/ www.picabay.com ]
* [https://www.rawpixels.com/ www.rawpixels.com ]
* [https://www.paletton.com/ www.paletton.com ]

== THS InkStitch 101 Class Resources ==
* [https://youtu.be/2681yeSrsM0 Lockstitch explained with animation ]
* [https://en.wikipedia.org/wiki/B%C3%A9zier_curve Wikipedia Bezier Curve Animation ]
* [https://en.wikipedia.org/wiki/Scalable_Vector_Graphics Wikipedia Scalable Vector Graphics ]

Create a folder on your laptop for InkStitch 101 Projects, then copy these files to your project folder as follows:
* Right-Click link > Open in New Tab
* Right-Click Image > Save File As > Browse to your project-folder
* [[Media:Fairy-mermaid-coloring-page.png]]
* [[Media:MERMAID BIRTHDAY.svg]]
* [[Media:Awesome.png]]

File:Babylock Endurance 300 x 200mm.svg

2024-07-23T23:31:48Z

Moss:

File:Babylock Endurance 180 x 130mm.svg

2024-07-23T23:31:35Z

Moss:

File:Babylock Endurance 100 x 100mm.svg

2024-07-23T23:31:27Z

Moss:

File:Babylock Endurance 60 x 40mm.svg

2024-07-23T23:31:08Z

Moss:

Tools: 240V Sockets

2024-07-14T04:46:08Z

Moss:

== Locations ==
* a
* b

[[Category:Tools]]

Software: Tinkercad

2024-07-14T04:11:29Z

Moss: Removed redirect to Trash:Software: Tinkercad

[https://www.tinkercad.com/ Tinkercad] is an easy-to-use 3D CAD design tool. Quickly turn your idea into a CAD model for a 3D printer with Tinkercad.

== Installing ==
There is nothing to install. Just go to https://www.tinkercad.com/, and create an account. It runs in a web browser. If you're not ready for [[Classes: Fusion 360|Fusion 360]], then give Tinkercad a try.

== Step-by-Step Lessons ==
When you first create an account, it walks you through some step by step lessons. You can revisit them by clicking [https://www.tinkercad.com/learn/ learn] across the top banner.

[[Category:Software]]

Software: Tinkercad

2024-07-14T04:10:55Z

Moss: Moss moved page Software: Tinkercad to Trash:Software: Tinkercad

#REDIRECT [[Trash:Software: Tinkercad]]

Trash:Software: Tinkercad

2024-07-14T04:10:55Z

Moss: Moss moved page Software: Tinkercad to Trash:Software: Tinkercad

Tools: Software

2024-07-14T04:10:05Z

Moss: Moss moved page Tools: Software to Trash:Tools: Software

#REDIRECT [[Trash:Tools: Software]]

Trash:Tools: Software

2024-07-14T04:10:05Z

Moss: Moss moved page Tools: Software to Trash:Tools: Software

Trash:Tools: Software

2024-07-14T04:09:56Z

Moss: Blanked the page

Category:Tools:Software

2024-07-14T04:09:09Z

Moss: Moss moved page Category:Tools:Software to Category:Trash:Software

#REDIRECT [[:Category:Trash:Software]]

Category:Trash:Software

2024-07-14T04:09:09Z

Moss: Moss moved page Category:Tools:Software to Category:Trash:Software

Category:Trash:Software

2024-07-14T04:09:02Z

Moss: Blanked the page

Category:Software

2024-07-14T04:08:40Z

Moss:

A partial list of software

[[Category:Tools]]

Software: Corel Draw

2024-07-14T04:08:01Z

Moss:

== 2019 ==
Placeholder

== 2021 ==
Placeholder

[[Category:Software]]

Software: Inkscape

2024-07-14T04:07:53Z

Moss:

[https://inkscape.org/ Inkscape]

[[Category:Software]]

Software: Cricut Design Space

2024-07-14T04:07:47Z

Moss:

[https://design.cricut.com Cricut Design Space]

[[Category:Software]]

Tools: Cricut Explore Air 2

2024-07-14T04:07:26Z

Moss:

== External Images ==
[[Software:_Cricut_Design_Space|Cricut Design Space]] often malfunctions if it loses internet connection and is generally buggy. Possible alternatives are to design in [[Software:_Inkscape|Inkscape]] or [[Software:_Corel_Draw|Corel Draw]].

To use an external image:
# Click Canvas → Upload
# Follow the prompts
# Click Canvas → Images → My Stuff → Uploaded
# Select your image

== Setup & Install ==
[https://help.cricut.com/hc/en-us/articles/360009430394-How-do-I-set-up-my-Cricut-Explore-or-Cricut-Maker-machine Manufacturer Instructions]

# Uninstall any existing driver
# Download [https://design.cricut.com Cricut Design Space]
# Install '''CricutDesignSpace-Install-vX.Y.Z'''
# Obtain login from Ryan Burgess

== Notes ==
The cutting head reads '''Cut Smart 2'''

[[Category:Tools]]
[[Category:Tools:Vinyl_Cutting]]

Tools:Software: Inkscape

2024-07-14T04:07:00Z

Moss: Moss moved page Tools:Software: Inkscape to Software: Inkscape

#REDIRECT [[Software: Inkscape]]

Software: Inkscape

2024-07-14T04:07:00Z

Moss: Moss moved page Tools:Software: Inkscape to Software: Inkscape

[https://inkscape.org/ Inkscape]

[[Category:Tools:Software]]

Tools:Software: Cricut Design Space

2024-07-14T04:06:54Z

Moss: Moss moved page Tools:Software: Cricut Design Space to Software: Cricut Design Space

#REDIRECT [[Software: Cricut Design Space]]

Software: Cricut Design Space

2024-07-14T04:06:54Z

Moss: Moss moved page Tools:Software: Cricut Design Space to Software: Cricut Design Space

[https://design.cricut.com Cricut Design Space]

[[Category:Tools:Software]]

Tools:Software: Corel Draw

2024-07-14T04:06:47Z

Moss: Moss moved page Tools:Software: Corel Draw to Software: Corel Draw

#REDIRECT [[Software: Corel Draw]]

Software: Corel Draw

2024-07-14T04:06:47Z

Moss: Moss moved page Tools:Software: Corel Draw to Software: Corel Draw

== 2019 ==
Placeholder

== 2021 ==
Placeholder

[[Category:Tools:Software]]

Software: Cricut Design Space

2024-07-14T04:06:09Z

Moss:

[https://design.cricut.com Cricut Design Space]

[[Category:Tools:Software]]

Tools: Cricut Explore Air 2

2024-07-14T04:05:27Z

Moss:

== External Images ==
[[Tools:Software:_Cricut_Design_Space|Cricut Design Space]] often malfunctions if it loses internet connection and is generally buggy. Possible alternatives are to design in [[Tools:Software:_Inkscape|Inkscape]] or [[Tools:Software:_Corel_Draw|Corel Draw]].

To use an external image:
# Click Canvas → Upload
# Follow the prompts
# Click Canvas → Images → My Stuff → Uploaded
# Select your image

== Setup & Install ==
[https://help.cricut.com/hc/en-us/articles/360009430394-How-do-I-set-up-my-Cricut-Explore-or-Cricut-Maker-machine Manufacturer Instructions]

# Uninstall any existing driver
# Download [https://design.cricut.com Cricut Design Space]
# Install '''CricutDesignSpace-Install-vX.Y.Z'''
# Obtain login from Ryan Burgess

== Notes ==
The cutting head reads '''Cut Smart 2'''

[[Category:Tools]]
[[Category:Tools:Vinyl_Cutting]]

Tools: Cricut Explore Air 2

2024-07-14T04:04:26Z

Moss:

== Notes ==
The cutting head reads '''Cut Smart 2'''
== Notes ==
[[Tools:Software:_Cricut_Design_Space|Cricut Design Space]] often malfunctions if it loses internet connection and is generally buggy. Possible alternatives are to design in [[Tools:Software:_Inkscape|Inkscape]] or [[Tools:Software:_Corel_Draw|Corel Draw]].

To use an external image:
# Click Canvas → Upload
# Follow the prompts
# Click Canvas → Images → My Stuff → Uploaded
# Select your image

== Setup & Install ==
[https://help.cricut.com/hc/en-us/articles/360009430394-How-do-I-set-up-my-Cricut-Explore-or-Cricut-Maker-machine Manufacturer Instructions]

# Uninstall any existing driver
# Download [https://design.cricut.com Cricut Design Space]
# Install '''CricutDesignSpace-Install-vX.Y.Z'''
# Obtain login from Ryan Burgess

[[Category:Tools]]
[[Category:Tools:Vinyl_Cutting]]

Electric Vehicles

2024-07-14T04:01:51Z

Moss:

== Tags ==
* EV
* SAE J1772 / J-1772 / 1772
* Tesla NACS

== Charging ==
[[Tools:_240V_Sockets|Sockets]]