Tools: Jen-Ken Kiln

From Tampa Hackerspace
Revision as of 02:06, 18 November 2019 by Tabinfl (talk | contribs)
Jump to navigation Jump to search

Jen-Ken JK-1811 Kiln

This kiln was donated to us but has not yet been set up or used at the space. It requires 20 amp 240V power, which is available in the building, but is being used for other equipment. The kiln needs to be connected to power and tested.

If anyone is interested in using this kiln, we can work towards setting it up for use!

The manual is on Google Drive.

Retrieved from "https://wiki.tampahackerspace.com/index.php?title=Tools:_Jen-Ken_Kiln&oldid=659"