Tools: ShapeOko 2

From Tampa Hackerspace
Revision as of 00:35, 30 May 2017 by Tabinfl (talk | contribs)
Jump to navigation Jump to search

The ShapeOko2 has been disassembled with the intent of converting it into a LinuxCNC machine

This page is let for historical purposes.


Tool Description:

  • Open source platform and components
  • 12" x 12" x 2.5" effective work volume
  • Precision: X Axis 25μm, Y Axis 25μm, Z Axis 3.125μm
  • Arduino Microcontroller


Materials (what to use, and not use, it on):

  • Broad range of materials that may be worked (See materials and feed rates link below for details):
    • Wood (successfully milled)
    • Metal
    • Plastic
    • Composites
    • Some Stones
    • PCB
    • Linoleum
    • Corian

ShapeOko Wiki page on Materials and Feed Rates


General and Special Safety Considerations:

This is not an exhaustive list!

  • Always wear safety glasses.
  • Read, understand and follow all warning labels, instructions and safety manuals.
  • Take the class.

Shapeoko 2 Safety and Operating Checklist


Tool Use:

  • Use Easel (http://www.easel.com/) to design simple cuts, generate gcode, and control the ShapeOko.
  • Other software may be better for complex designs.


Tips and Tricks:

  • Wood or plastic panels can be positioned to prevent waste material from being thrown. This includes shielding the controlling laptop.


Related links:

Shapeoko 2 Safety and Operating Checklist

ShapeOko Wiki page on Materials and Feed Rates

ShapeOko Wiki page on Endmills