Tools: AnyCubic Kobra Max: Difference between revisions
Jump to navigation
Jump to search
Started a page for the large bed 3d printer. I used the current Prusa page as a template, but commented out much of the material since I am not 100% sure about it. |
m added link to manual |
||
| Line 13: | Line 13: | ||
[https://store.anycubic.com/products/kobra-max Specs and Features - Anycubic Site] | [https://store.anycubic.com/products/kobra-max Specs and Features - Anycubic Site] | ||
User Manual (coming soon) | [https://drive.google.com/file/d/10txcfV8EBAKxFtMcP9IZGq4yo4nWdWMz/view?usp=drive_link|User Manual (coming soon)] | ||
== Usage Notes == | == Usage Notes == | ||
Latest revision as of 02:59, 5 August 2026
Training class required
Tool Description:
Build Envelope: 400 × 400 × 450 mm (15.75" × 15.75" × 17.72")
Manuals
Specs and Features - Anycubic Site
Usage Notes
- Power switch is located on the right side near the rear power inlet
- Operated via front touchscreen panel
Build Plate & Adhesion
- **Carborundum Glass Bed:** This printer uses a textured glass bed (does NOT flex like the Prusa spring steel sheets)
- **STRICT SHOP RULE:** **ABSOLUTELY NO razor blades, sandpaper, or metal scrapers on this bed!** Metal tools will permanently destroy the micro-porous glass coating
- **NO adhesives allowed:** No glue sticks, blue tape, hairspray, or ABS slurry
- Clean bed ONLY with Isopropyl Alcohol (IPA) and a lint-free wipe when the bed is room temperature
- **Print Removal:** Allow the bed to cool completely to room temperature before removing prints. The plastic will naturally release as the glass cools.
- Use only soft plastic tools or fingernails if assistance is needed