Tools: AnyCubic Kobra Max: Difference between revisions
Jump to navigation
Jump to search
Created page with "thumb|alt=AnyCubic Kobra Max|AnyCubic Kobra Max" |
m added link to manual |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:AnyCubic Kobra Max.webp| | [[File:AnyCubic Kobra Max.webp|300px|right|alt=AnyCubic Kobra Max|AnyCubic Kobra Max]] | ||
<span style="background-color:#fef6e7; border: 1px solid #fc3; padding:8px;">Training class required</span> | |||
== Tool Description: == | |||
Build Envelope: 400 × 400 × 450 mm (15.75" × 15.75" × 17.72") | |||
<!-- Nozzle: 0.4mm (Volcano style) --> | |||
== Manuals == | |||
[https://store.anycubic.com/products/kobra-max Specs and Features - Anycubic Site] | |||
[https://drive.google.com/file/d/10txcfV8EBAKxFtMcP9IZGq4yo4nWdWMz/view?usp=drive_link|User Manual (coming soon)] | |||
== Usage Notes == | |||
* Power switch is located on the right side near the rear power inlet | |||
* Operated via front touchscreen panel | |||
=== Build Plate & Adhesion === | |||
* **Carborundum Glass Bed:** This printer uses a textured glass bed (does NOT flex like the Prusa spring steel sheets) | |||
* **STRICT SHOP RULE:** **ABSOLUTELY NO razor blades, sandpaper, or metal scrapers on this bed!** Metal tools will permanently destroy the micro-porous glass coating | |||
* **NO adhesives allowed:** No glue sticks, blue tape, hairspray, or ABS slurry | |||
* Clean bed ONLY with Isopropyl Alcohol (IPA) and a lint-free wipe when the bed is room temperature | |||
* **Print Removal:** Allow the bed to cool completely to room temperature before removing prints. The plastic will naturally release as the glass cools. | |||
** Use only soft plastic tools or fingernails if assistance is needed | |||
<!-- | |||
=== Filament & Loading === | |||
* Bowden extruder setup: Cut filament tip at a sharp 45-degree angle before feeding through the filament runout sensor and dual-gear extruder | |||
* Load and unload filament via the touchscreen menu (`Prepare` -> `Filament`) | |||
* Currently allowing PLA and PETG on this printer | |||
* Consult shop stewards for specialty filament needs (TPU, ASA, etc.)--> | |||
<!-- | |||
=== Operation & Printing === | |||
* **Large Bed Warm-Up:** The massive 400x400mm bed takes longer to reach temperature than smaller printers. Allow extra time for thermal equalization | |||
* **Clearance:** Keep the area behind and in front of the printer clear—the bed travels far along the Y-axis during prints | |||
* LeviQ auto-bed leveling is active; always monitor the first 2–3 layers to confirm proper Z-offset and first-layer adhesion | |||
* Unload filament when print job is complete | |||
* Infill over 40% is generally wasted material and time | |||
--> | |||
<!-- | |||
== General and Special Safety Considerations: == | |||
'''This is not an exhaustive list!''' | |||
* '''Read, understand, and follow all warning labels, instructions, and safety manuals.''' | |||
* Take the required training class before operating. | |||
* **Burn Hazard:** Extruder (up to 260 °C) and build plate (up to 100 °C) reach extreme temperatures. | |||
* **Pinch & Mechanical Hazard:** High-torque motors and a large moving bed. Keep hands, loose clothing, hair, and cables clear of all motion paths (especially the Y-axis rear clearance zone). | |||
--> | |||
[[Category:Tools]] | |||
[[Category:3D Printing]] | |||
<!--[[Category:Materials:PETG]] | |||
[[Category:Materials:PLA]]--> | |||
Latest revision as of 02:59, 5 August 2026
Training class required
Tool Description:
Build Envelope: 400 × 400 × 450 mm (15.75" × 15.75" × 17.72")
Manuals
Specs and Features - Anycubic Site
Usage Notes
- Power switch is located on the right side near the rear power inlet
- Operated via front touchscreen panel
Build Plate & Adhesion
- **Carborundum Glass Bed:** This printer uses a textured glass bed (does NOT flex like the Prusa spring steel sheets)
- **STRICT SHOP RULE:** **ABSOLUTELY NO razor blades, sandpaper, or metal scrapers on this bed!** Metal tools will permanently destroy the micro-porous glass coating
- **NO adhesives allowed:** No glue sticks, blue tape, hairspray, or ABS slurry
- Clean bed ONLY with Isopropyl Alcohol (IPA) and a lint-free wipe when the bed is room temperature
- **Print Removal:** Allow the bed to cool completely to room temperature before removing prints. The plastic will naturally release as the glass cools.
- Use only soft plastic tools or fingernails if assistance is needed