Tools: Tevo Tornado: Difference between revisions
Jump to navigation
Jump to search
Created page with "Tevo Tornado 3D Printer, with BLTOUCH == See Also == * https://support.th3dstudio.com/helpcenter/tevo-tornado-firmware/ * https://github.com/Homers3D/Tevo-Tornado Category:Tools Category:Fabrication Category:3D Printing" |
No edit summary |
||
| Line 1: | Line 1: | ||
Tevo Tornado 3D Printer, with | Tevo Tornado 3D Printer with BLTOUCH and Wham Bam Pex build plate. | ||
== Firmware == | |||
marlin 2.0.x bugfix | |||
== Issues == | |||
OctoPrint issues <code>M155 S2</code>, but printer does not report temperatures. See [https://marlinfw.org/docs/gcode/M155.html https://marlinfw.org/docs/gcode/M155.html]. The firmware is built with AUTO_REPORT_TEMPERATURES and EXTENDED_CAPABILITIES_REPORT. Without repeated temperature reports, OctoPrint times out the connection with the printer. Building the firmware with <code>#define NO_TIMEOUTS 1000</code> causes the printer keep the connection alive with <code>wait</code> responses. | |||
== OctoPrint == | |||
[http://10.255.0.135 http://10.255.0.135] | |||
OctoPi 0.18.0 with OctoPrint 1.8.4 running on a Raspberry Pi 4 Model B Rev 1.2 2GB RAM | |||
Plugins: | |||
* Action Command Notification Support (bundled) | |||
* Action Command Prompt Support (bundled) | |||
* Announcement Plugin (bundled) | |||
* Anonymous Usage Tracking (bundled) | |||
* Application Keys Plugin (bundled) | |||
* Backup & Restore (bundled) | |||
* BetterHeaterTimeout (1.3.0) | |||
* BLTouch Plugin (0.3.4) | |||
* Core Wizard (bundled) | |||
* Discovery (bundled) | |||
* Error Tracking (bundled) | |||
* Event Manager (bundled) | |||
* File Check (2021.2.23) (bundled) | |||
* Firmware Check (2021.10.11) (bundled) | |||
* GCode Viewer (bundled) | |||
* Logging (bundled) | |||
* Pi Support Plugin (2022.6.13) (bundled) | |||
* Plugin Manager (bundled) | |||
* Slack (0.2.5) | |||
* Software Update (bundled) | |||
* Virtual Printer (bundled) | |||
== See Also == | == See Also == | ||
* https://www.tevousa.com/products/tevo-tornado-3d-printer-kit | |||
* https://support.th3dstudio.com/helpcenter/tevo-tornado-firmware/ | * https://support.th3dstudio.com/helpcenter/tevo-tornado-firmware/ | ||
* https://github.com/Homers3D/Tevo-Tornado | * https://github.com/Homers3D/Tevo-Tornado | ||
Revision as of 19:39, 15 October 2022
Tevo Tornado 3D Printer with BLTOUCH and Wham Bam Pex build plate.
Firmware
marlin 2.0.x bugfix
Issues
OctoPrint issues M155 S2, but printer does not report temperatures. See https://marlinfw.org/docs/gcode/M155.html. The firmware is built with AUTO_REPORT_TEMPERATURES and EXTENDED_CAPABILITIES_REPORT. Without repeated temperature reports, OctoPrint times out the connection with the printer. Building the firmware with #define NO_TIMEOUTS 1000 causes the printer keep the connection alive with wait responses.
OctoPrint
http://10.255.0.135 OctoPi 0.18.0 with OctoPrint 1.8.4 running on a Raspberry Pi 4 Model B Rev 1.2 2GB RAM
Plugins:
- Action Command Notification Support (bundled)
- Action Command Prompt Support (bundled)
- Announcement Plugin (bundled)
- Anonymous Usage Tracking (bundled)
- Application Keys Plugin (bundled)
- Backup & Restore (bundled)
- BetterHeaterTimeout (1.3.0)
- BLTouch Plugin (0.3.4)
- Core Wizard (bundled)
- Discovery (bundled)
- Error Tracking (bundled)
- Event Manager (bundled)
- File Check (2021.2.23) (bundled)
- Firmware Check (2021.10.11) (bundled)
- GCode Viewer (bundled)
- Logging (bundled)
- Pi Support Plugin (2022.6.13) (bundled)
- Plugin Manager (bundled)
- Slack (0.2.5)
- Software Update (bundled)
- Virtual Printer (bundled)