Tools: Heat Press
DL8300 Heat Press
This is a somewhat generic cheap heat press.
Some potential directions here and a not-quite-matching manual.
Lamination
Paper can be laminated using the following process
- Preheat to 300F/150C
- Place the thermal laminating sleeve between two Teflon sheets (in the left drawer)
- Place the the two Teflon sheets on top of the carpet underlayment
- Close the press for 35 seconds (tested with 4x6" sleeves, will vary based on size and thickness)
- Open the press and remove the Teflon sheets
- Let it rest for 5-10 seconds before carefully peeling away the top Teflon sheet from the corner