Tools: Tevo Tornado
Tevo Tornado 3D Printer with BLTOUCH and Wham Bam Pex build plate.
Firmware
marlin 2.0.x bugfix at 164199614c4614144d4b4abc455adc6393d9167a dated Sat Jan 30 07:07:35 2021 +0100.
Issues
OctoPrint issues M155 S2, but printer does not report temperatures. See https://marlinfw.org/docs/gcode/M155.html. The firmware is built with AUTO_REPORT_TEMPERATURES and EXTENDED_CAPABILITIES_REPORT. To back that up, the printer responds to M115 with Cap:AUTOREPORT_TEMP:1. Without repeated temperature reports, OctoPrint times out the connection with the printer. Building the firmware with periodic #define NO_TIMEOUTS 1000 causes the printer keep the connection alive with wait responses.
The BAUDRATE was set to 115200 during debugging, but can likely go back to 250000.
OctoPrint
http://10.255.0.135 OctoPi 0.18.0 with OctoPrint 1.8.4 running on a Raspberry Pi 4 Model B Rev 1.2 2GB RAM
Plugins:
- Action Command Notification Support (bundled)
- Action Command Prompt Support (bundled)
- Announcement Plugin (bundled)
- Anonymous Usage Tracking (bundled)
- Application Keys Plugin (bundled)
- Backup & Restore (bundled)
- BetterHeaterTimeout (1.3.0)
- BLTouch Plugin (0.3.4)
- Core Wizard (bundled)
- Discovery (bundled)
- Error Tracking (bundled)
- Event Manager (bundled)
- File Check (2021.2.23) (bundled)
- Firmware Check (2021.10.11) (bundled)
- GCode Viewer (bundled)
- Logging (bundled)
- Pi Support Plugin (2022.6.13) (bundled)
- Plugin Manager (bundled)
- Slack (0.2.5)
- Software Update (bundled)
- Virtual Printer (bundled)