Tools: ShapeOko 2
The ShapeOko2 has been disassembled with the intent of converting it into a LinuxCNC machine
This page is let for historical purposes.
Tool Description:
- Open source platform and components
- 11.5" wide x 13" deep x 2.5" high effective work volume. Some of the work piece will be off the machine's bed.
- The bed is 16" wide, and can accommodate a piece of unlimited length.
- Precision: X Axis 25μm, Y Axis 25μm, Z Axis 3.125μm
- Arduino Microcontroller
Materials (what to use, and not use, it on):
- Broad range of materials that may be worked (See materials and feed rates link below for details):
- Wood (successfully milled)
- Metal
- Plastic
- Composites
- Some Stones
- PCB
- Linoleum
- Corian
ShapeOko Wiki page on Materials and Feed Rates
General and Special Safety Considerations:
This is not an exhaustive list!
- Always wear safety glasses.
- Read, understand and follow all warning labels, instructions and safety manuals.
- Take the class.
Shapeoko 2 Safety and Operating Checklist
Tool Use:
- Use Easel (http://www.easel.com/) to design simple cuts, generate gcode, and control the ShapeOko.
- Other software may be better for complex designs.
Tips and Tricks:
- Wood or plastic panels can be positioned to prevent waste material from being thrown. This includes shielding the controlling laptop.
Related links:
Shapeoko 2 Safety and Operating Checklist