Tools: AnyCubic Kobra Max
Training class required
Tool Description:
Build Envelope: 400 × 400 × 450 mm (15.75" × 15.75" × 17.72")
Manuals
Specs and Features - Anycubic Site
Usage Notes
- Power switch is located on the right side near the rear power inlet
- Operated via front touchscreen panel
Build Plate & Adhesion
- **Carborundum Glass Bed:** This printer uses a textured glass bed (does NOT flex like the Prusa spring steel sheets)
- **STRICT SHOP RULE:** **ABSOLUTELY NO razor blades, sandpaper, or metal scrapers on this bed!** Metal tools will permanently destroy the micro-porous glass coating
- **NO adhesives allowed:** No glue sticks, blue tape, hairspray, or ABS slurry
- Clean bed ONLY with Isopropyl Alcohol (IPA) and a lint-free wipe when the bed is room temperature
- **Print Removal:** Allow the bed to cool completely to room temperature before removing prints. The plastic will naturally release as the glass cools.
- Use only soft plastic tools or fingernails if assistance is needed